To be able to use We-Row you need to comply with the following requirements:

1. Java 5.0 (or higher) needs to be installed
2. You must register on this page
3. Your PC must receive Data from the S4 Monitor

1. Jave Runtime environment

To be able to run We-Row as Java Web Start program smoothly on you computer, you must install Java 5.0 or higher. If you already have Java on your computer, please check if there is an updated version available.

2. Register and set up your account

Register on this page. Please read the terms of use and the "code of fairness".

Once successfully registered you can browse to your profile and set your account (timezone, default language, etc.). Please take time to fill in the registration form completely. Click here to get more help...

3. Receive data from the S4 Monitor

The WaterRowers S2 and S3 Monitor is NOT compatible.

Now you must make sure you have connected your WaterRower correctly with your PC or Laptop.

Info: Since serialnumber 52045 the performance monitor has a mini-USB connector socket on the back (left picture below), previous monitors have the original mini-DIN (6 pin) connector socket (right picture below).

• If you have a mini-USB connector socket on the back.
  The usb connection cable has a USB Series "A" plug for connecting the S4 Monitor with your PC.
  
  
• If you have a mini-DIN connector socket on the back.
  The serial pc connection cable has a serial port for connecting the S4 Monitor with your PC.
  If you don't have a serial port at your computer anymore, you need a "USB to RS 232 serial Adapter". This adapter can be purchased at any local electronics dealer or directly at WaterRower US.
  (Unfortunately we have experienced that not every on the market available adapter works properly.)
  

When using WaterRowers USB-Adaptor or the mini-USB cable you may need to download and install a driver according to your operating system. An install-instruction is available here.

• Create a LocalRace and press "Launch".
• Now you will be transferred to the starting window of We-Row to enter your username and your password.
  
  (We suggest your PC to allow saving your password, in order for you to start without entering your data each time)
• After you have successfully loged in select SETTINGS from the mainmenu.
  
• Make sure that you have select the right Com-Port on your PC and test the connection by turn on the monitor and row a few strokes.
  
• Once the test is successful, click on SAVE. You're now ready for your LocalRace.
• If you don't receive any data try to test another Com-Port. (Port-Name)